When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $54.90
Item Description：
Plug-n-play installation: fully compatible as a replacement for factory parts.
High Quality: Fully sealed, waterproof, dust and corrosion resistant, works perfectly even in harsh weather conditions.
Fitment:For 2001-2011 Ford Ranger
OEM: 6L5Z13008BA, 6L5Z13008AA, 6L5Z15A201BA, 6L5Z15A201AA
Made of materials that meet or exceed OEM requirements
High & Low Beam Bulb:HB5(Not included)
Turn Signal: 3457A(Not included)
Chrome Housing Clear Lens
Pair LH (Driver Side) + RH(Passenger Side) Headlights + Corner Lights
Tips:(How to install):
1. Undo the screws, clips, or retainer springs that hold the headlight in place.
2. Disconnect the wiring from the assembly.
3. Detach the headlight from the vehicle to replace it with a new one.
4. Fit in the new headlight assembly.
5. Fix the new headlight into place and make sure that the screws, clips, or retainer springs used are sealed.
6. Reconnect the wiring that was unplugged from the assembly.
7. Put back the grille and other components that you removed. Seal them back into place.
8. Test the new assembly.
(How toadjust your headlight):
Before you begin to adjust the light, make sure to check the alignment of your lights first. Park the vehicle about
10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any
higher than 3.5 feet above the ground.
1.Find the adjustment screws.Firstly, locate the adjustment screws on your vehicle.
2.Adjust the headlights individually.The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light, you want to block. Covering the light assembly directly can damage the plastic lens.
3.Adjust the vertical field.The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.
4.Adjust the horizontal field.The screw on the side of the light housing should be turned to get the right/left
adjustmentcorrect. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.
5.Test your results.
WE ACCEPT THESE PAYMENT METHODS
( 10% sales tax will be applied for orders shipped to Washington state by state law )
- 30 Days easy returns satisfaction guarantee.
- Items to be returned must be in original factory condition.
- Please enclose a note about item number and order id, your eBay ID and the reason of return.