When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $21.01
DT-AUto partsFor 1983-1989 Mitsubishi Starion HVAC Heater Hose-Heater To Intake ManifoldOrder Processing Time: 1 DaysBusiness Hours: 9 am to 5 p.m. EST, MON to FRI
IMPORTANT!!! To confirm that this part fits your vehicle, enter your vehicle's Year, Make, Model, Trim, and Engine in the eBay Compatibility Table. Check The Compatibility Notes. If you are not sure if this part will fit your car please contact us with your vehicle identification number (VIN) and we will be more than happy to help you to verify it. If required we will suggest an alternative item. Part Number: 166ZT18 Brand: Gates Warranty: 1 Year Placement on Vehicle: Heater To Intake Manifold Pack Qty: 1 Condition: New Notes: Position: Heater To Intake Manifold; Fitment Notes: 2.6L L4 GAS; Application: Mitsubishi Starion HVAC Heater Hose Part Type: HVAC Heater Hose Product Name: Molded Heater Hose Description: Premium Molded Heater Hose Years: 1983 1984 1985 1986 1987 1988 1989 Molded: Yes Material: EPDM Number of Quick Connect Fittings: 0 End 1 Inside Diameter: .62 IN End 2 Inside Diameter: .62 IN Centerline Length (mm): 274 Centerline Length (in): 10.8 PART AND FITMENT DETAILSBest Price Guarantee
Our Best Price Guarantee is part of our commitment to always offer you the lowest possible price.
Item DescriptionHVAC Heater Hose;
Molded Heater Hose;
Premium Molded Heater Hose;Placement On Vehicle: Heater To Intake ManifoldNotes: Position: Heater To Intake Manifold; Application: 2.6L L4 GAS;
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today?ÇÖs smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation ?Çô the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
NOTE: Gates recommends replacing hose clamps each time a new coolant hose is installed.
CAUTION: Do not use for fuel or oil transfer applications.
Fitment Notes:Position: Heater To Intake ManifoldYearMakeModelApplication1983-1989MitsubishiStarion2.6L L4 GAS; ABOUT THE SELLERWe are a small family business of auto parts and auto parts accessories. Our mission is to provide quality products, best customer care, and fast shipping.Whether you are doing maintenance, a long-term automotive project, or just trying to get your vehicle running, count on DTautoparts to help you with your small or big project. CUSTOMER SUPPORTIf you have questions about the product or your order please contact us via eBay Messages for assistance. Thank you. Business Hours: 9 am to 5 p.m. EST, MON to FRI RETURN POLICY Return shipping paid by:Seller
Item must be returned within: 30 days
Refund will be given as: MoneyBack
Returned parts will be inspected, and a refund given within 5 business days if the part is new, unopened, and uninstalled. PART AND FITMENT DETAILSBest Price Guarantee
Our Best Price Guarantee is part of our commitment to always offer you the lowest possible price.
Item DescriptionHVAC Heater Hose;
Molded Heater Hose;
Premium Molded Heater Hose;Placement On Vehicle: Heater To Intake ManifoldNotes: Position: Heater To Intake Manifold; Application: 2.6L L4 GAS;
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today?ÇÖs smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation ?Çô the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
NOTE: Gates recommends replacing hose clamps each time a new coolant hose is installed.
CAUTION: Do not use for fuel or oil transfer applications.
Fitment Notes:Position: Heater To Intake ManifoldYearMakeModelApplication1983-1989MitsubishiStarion2.6L L4 GAS; ABOUT THE SELLERWe are a small family business of auto parts and auto parts accessories. Our mission is to provide quality products, best customer care, and fast shipping.
Whether you are doing maintenance, a long-term automotive project, or just trying to get your vehicle running, count on DTautoparts to help you with your small or big project.
CUSTOMER SUPPORT If you have questions about the product or your order please contact us via eBay Messages for assistance. Thank you. Business Hours: 9 am to 5 p.m. EST, MON to FRI RETURN POLICY Return shipping paid by:Seller
Item must be returned within: 30 days
Refund will be given as: MoneyBack
Returned parts will be inspected, and a refund given within 5 business days if the part is new, unopened, and uninstalled.