When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $125.00
BadlanzHPE Electric Exhaust Cutout Cutouts 2.25 INCH S Click Thumbnails to Enlarge
NEW 5 YEAR WARRANTY!
IMPROVED WATER RESISTANT GEARMOTOR WITH ALL STEEL GEARSETS!
5 YEAR WARRANTY! FROM DATE OF PURCHASE
NEW UNIVERSAL STANDARD HOLE PATTERN VALVE DESIGN!
THIS 2.25 INCH VALVE IS DESIGNED FOR A CUSTOM SETUP. YOU MUST CREATE YOUR OWN Y-PIPES, OR CONTACT BADLANZHPE FOR THEIR OWN STANDARD 2.25 INCH Y-PIPES!
THIS BUY IT NOW IS FOR ONE (1) SINGLE ELECTRIC E-CUTOUT 2.25 INCH.
WILL FIT ALL THREE HOLE FLANGES. PLEASE MEASURE YOUR Y-PIPES FLANGE FROM BOLT CENTER TO BOLT CENTER. 2.25 INCH FLANGES MEASURE 2 - 3/4 INCHES ACROSS. SEE PICTURES TO CONFIRM SIZE.
KIT INCLUDES: NEW STANDARD BadlanzHPE, Inc. ELECTRIC E-CUTOUT, 10 FOOT LONG WIRE HARNESS, DPDT ROCKER SWITCH, GASKET AND HARDWARE.
DESIGNED SPECIFICALLY FOR EVERY KNOWN AFTERMARKET Y-PIPE WITH A STANDARD THREE HOLE BOLT PATTERN.
NEW REVISED INTERNATIONAL SHIPPING PRICES!
WE WILL SHIP WORLD WIDE. NEW USPS EXPRESS MAIL FLAT RATE SHIPPING!!!
WILL SHIP 1 TO 15 BUSINESS DAYS
DEPENDING ON STOCK!
THIS PRODUCT IS INTENDED FOR RACING AND OFF-ROAD APPLICATIONS ONLY!
PRICES SUBJECT TO CHANGE WITHOUT NOTICE!
BADLANZHPE WILL LEAVE FEEDBACK ONCE FEEDBACK IS RECEIVED FROM BUYER! PaymentPayPal is the payment method that is preferred/accepted.
Shipping and HandlingItem location: Urbandale, Iowa, United States
Shipping to: Worldwide
Shipping and Handling To Service Delivery* Free shipping United States Expedited Shipping (USPS Priority Mail®) On or before Tue. Sep. 23 to 50322 per eBay FAST \'N FREE* Estimated delivery dates- opens in a new window or tab include seller\'s handling time, origin ZIP Code, destination ZIP Code and time of acceptance and will depend on shipping service selected and receipt of cleared payment. Delivery times may vary, especially during peak periods.
Sales TaxWe charge sales tax for items shipped to: IA (6.0%).
Return PolicyWe will accept items for exchange or a refund only if we are notified of the items to be returned within 14 days of the shipped date. We will accept returns less shipping costs, which have to be unused, in their original condition, in their original box and properly labeled. Shipping charges for exchanges will be required, and a 15% restocking fee applied for all return refunds.
To return or exchange an item, you need to request a Return Authorization Number (RA#). Do not ship the items back without a Return Authorization, as we cannot guarantee proper credit without it. All such packages will be refused. To request a Return Authorization Number, please click here to send an email with your Order Number. We are not responsible for shipping charges incurred to send the product back for exchange. The return must be shipped within 10 days of receiving the return authorization number. There are no exceptions to this policy.
WarrantyBadlanzHPE, Inc. provides a limited warranty against defects in materials and/or workmanship for a period of 5 years on the gear-motor and 5 years on the valve body from date of sale to the original purchaser. BadlanzHPE, Inc., upon inspection and verification of warranty, will repair or replace components, which prove to be defective.
IT IS AGREED THAT SELLER\'S LIABILITY ELECTRIC EXHAUST CUTOUTS ALLOW YOU TO OPEN AND CLOSE YOUR EXHAUST AT THE FLICK OF A SWITCH. THEY ARE NOT INTENDED TO BE OPENED AND CLOSED UNDER ANY DRIVING CONDITIONS OR HIGH RPMS. THE RESULT WILL BE GEARMOTOR DAMAGE WITH EXHAUST LEAKS AND A \"RATTLING\" SOUND COMING FROM THE EXHAUST CUTOUT. FAILURE TO OPEN OR CLOSE WITH ENGINE OFF OR AT ENGINE IDLE WILL VOID THE WARRANTY.
IT IS PURCHASER\'S SOLE REMEDY, WHETHER IN CONTRACT, UNDER ANY WARRANTY, IN TORT (INCLUDING NEGLIGENCE), IN STRICT LIABILITY OR OTHERWISE, SHALL NOT EXCEED THE RETURN OF THE AMOUNT OF THE PURCHASE PRICE PAID BY THE PURCHASER, AND UNDER NO CIRCUMSTANCES SHALL SELLER BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO: PERSONAL INJURY; PROPERTY DAMAGE; DAMAGE TO OR LOSS OF EQUIPMENT; LOST PROFITS OR REVENUE; COSTS OF RENTING REPLACEMENTS AND OTHER ADDITIONAL EXPENSES, EVEN IF SELLER HAS BEEN ADVISED OF THE POSSIBILTITY OF SUCH DAMAGES. THE PRICE STATED FOR THE EQUIPMENT IS A CONSIDERATION OF LIMITING SELLER\'S LIABILITY AND PURCHASER\'S REMEDY. SELLER WILL NOT BE LIABLE FOR ANY DAMAGES, LOSSES OR EXPENSES AS A RESULT OF PURCHASER\'S NEGLIGENCE, WHETHER DEEMED ACTIVE OR PASSIVE AND WHETHER OR NOT ANY SUCH NEGLIGENCE IS THE SOLE CAUSE OF ANY SUCH DAMAGE, LOSS OR EXPENSE.
ANY ATTEMPT TO DISASSEMBLE VALVE OR MOTOR VOIDS ALL WARRANTIES.
All costs of shipping shall be borne by the customer. $10.00 FOR SHIPPING AND HANDLING IS REQUIRED FOR ALL REPAIR RETURNS. 15% restocking fee on all returns.
PLEASE E-MAIL FOR RMA# FOR ALL RETURNS: click here
Seller reserves the right to approve or reject all orders. Prices are subject to change without notice.
Any and all suits for any and every loss based on this sale, whether in contract, restitution, tort, (including negligence), strict liability or any other judicial proceeding may only be instituted and maintained in any court competent jurisdiction in the County of Polk, State of Iowa.
It is mutually understood and agreed that this sale shall be governed by the laws of the State of Iowa
THIS PRODUCT IS INTENDED FOR RACING AND OFF-ROAD APPLICATIONS ONLY.
Federal, state, and local laws regulate motor vehicle emissions, safety, and noise levels. Federal law provides it is illegal to remove or render inoperative any motor vehicle emissions control device. This product is not intended for use on vehicles operating on public highways and streets. Only vehicles which fully conform to federal, state, and local emission, safety, and noise laws should be operated on public highways and streets.
About BadlanzHPE - Manufacturing High Power Exhausts (HPE)In 2002 a friend of mine purchased a cutout from a competitor and showed me how it worked. I thought it was pretty cool, so I designed my own, and installed two of them Spring 2003 on my \'79 Chevrolet Monte Carlo. The difference is the opening for a 3-inch pipe can only achieve a 2 5/8 inch butterfly. When you buy a cutout via the Internet, all that is taking place is bleed-off from the normal exhaust system. Only about half of the exhaust air is blowing out the cutout, where the rest goes out the back.
I wanted to achieve full exhaust airflow out the side or out the rear. Plus with a cutout under the vehicle, it creates extreme vibration, if not piped out the side of the car. My Monte Carlo actually ran worse when the side pipes were open and rear pipes closed, and vice versa. I could only achieve good engine power when both rear and side pipes were half-open.
I went to my engineer and he designed the flange adapter so I could achieve a full 3-inch opening, using a 3 1/2 inch butterfly. This way I am achieving full 3 inch opening without \"bottlenecking\" the system. Plus the flange adapters will work on any size pipe so all sizes will have \"FULL FLOW\". The flange adapters will bolt on to any existing Y-adapter cutout, without any modifying of the bolts on the cutout. Most Y-adapters come with very short bolts, thus having to replace them with longer bolts. I did not have one problem, Summer ’03, using the older style cutouts. That gave me enough confidence to invest lots of money to design and manufacture my own cutouts.
I knew the risks of having 4-cutouts, such as failure to open and thus blocking the exhaust flow, which would stall the engine. I installed one switch to open and close the cutouts simultaneously, so I would not risk forgetting to open the sides while the rear pipes were closing. I just inverted the wiring on the rear motors so they would turn in opposite direction. This actually worked much better than anticipated. Installing a pipe in front of the cutouts (similar to an X pipe setup) would prevent engine stalling due to a cutout not opening. Heat hasn\'t been an issue either. I am using a flexible EPDM rubber cap to protect the motor, which exceeds 600 degrees F.
In 2007 I decided to invest in a CNC Mini Mill to machine my own parts. I hired a company in Des Moines, Iowa, CREATIVE WORKS,INC. and completely re-designed the valves to eliminate leakage. This new design works flawlessly. All BadlanzHPE,Inc. race valves and other accessories are machined and built right here in the U.S.A.
I feel I have an excellent product, with enough real world testing for reliability, and performance.
Charles Gerst
President, BadlandzHPE
Badlanzhpe Inc.
Des Moines, Iowa US
BadlanzHPE reserves the right to change prices, terms, specifications and warranties for products on this Website at any time without prior notice. BadlanzHPE attempts to post accurate information, but errors may sometimes occur. Any such errors in product specifications, descriptions, and pricing will be corrected when discovered and BadlanzHPE reserves the right to revoke any stated offer and to correct any errors, inaccuracies or omissions, including after an order has been submitted. If an error in pricing is discovered after your order has been submitted, BadlanzHPE will inform you of the error at which time you may cancel or reaffirm your order at your option.
Prices subject to change without notice!
All costs of shipping shall be borne by the customer. $10.00 FOR SHIPPING AND HANDLING IS REQUIRED FOR ALL REPAIR RETURNS. 15% restocking fee on all returns.