When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $109.88
Chrome stick kit for OE replacement on 6 speed manual trans in:
- 2004-2006 Dodge Ram SRT-10 (V10 Viper engine, OEM Hurst base #5161428AA only)
- Does NOT FIT Viper cars or other Ram trucks
- Replaces Mopar #5037436AA (Hurst chrome stick #0061)
- Note: BEFORE you buy - confirm two silver nuts fasten stick to stub (=7/8" bolt spacing). Early models used bolts that thread into stub - these models have 1" bolt spacing that requires slotting the top stick hole (available slotted +$20)
- Use with STOCK TRIM & BOOT - no other parts needed
- OE rubber isolator is eliminated, creating a solid feel to enhance control
- Knob height is 2.5" lower than stock = 13% throw reduction!
Kit includes PLAIN chrome stick #7991, classic 6 spd knob w/ plain sides, & M10 adapter bolts
To install:
- Remove stock stick and all parts of rubber isolator down to bare stub
- Mate serrations of stick to serrations of stub. Insert supplied bolts thru stick and stub. Thread supplied locknuts onto bolts and tighten to 33 ft-lb