When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $138.68
Welcome to our page!
For sale we have 4 of our custom made 5 x 112 bmw i3 or i8Wheel Spacers sold with 20 x Extended TAPERED M14 x 1.25 HT wheel bolts
LARGER 150mm outside diameter billets for thelarger hubs!!
ALL OUR BOLTS ARE TUV APPROVED by the Technical Inspection Association
TAPERED BOLTS ARE SENT OUT WITH THIS LISTING
FOR ORIGIONAL/OEM WHEELS
Spacers are 15mm wide giving 30mm overall increase across the axles.
These spacers are designed to fit a 66.5mm HUB and wheel bore.
Allour custom-made spacers and adapters are manufactured from 6082 T6 Solid billetAluminium and machined by our skilled Engineers at our Barnsley HQ.
One ofthe most cost-effective mods on the market and easy to fit in 7 steps
- Simply unbolt your wheel and remove.
- Wire brush and wipe the bore and wheel hub clean, (must be dirt/rust free)
- Apply a little copper grease or similar to stop the faces sticking together.
- Slide the spacer on to your existing hub.
- Check the spacer is sitting flush against the original hub with no visible gap
- Gently position the wheel on to the spacer spigot taking care not to damage the machined surfaces.
- Secure the wheel with the extended bolts and torque them to the required spec.
WatfieldsPrecision Engineering also manufacture custom parts as well as wheel spacersand adapters.
All our wheel spacers are manufacturedfrom material sourced in the UK and are produced by Watfields PrecisionEngineering UK LTD.
Visit www.watfields.com
Please contact us to discuss any enquiries you mayhave