When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $450.00
CNS dual-mass 10.5 in flywheel...weighs just under 32lbs vs the 42lb+ OEM flywheel. Great modification..revs quicker and smoother and puts more power at the wheels. I bought this last September off the M5 board and ended up not using it (was going to super charge, but holding off for a while). Per the seller I bought it from: \"I took it to a shop that specializes in dual mass resurfacing and they easily resurfaced it with no issues. Weighs exactly the same as it did before the surfacing and is ready to be mated with a new clutch.\" These are $1599 new on CNS\' website ($2499 for the entire kevlar kit). You\'ll need a 10.5\" pressure plate/clutch to match up to it (mid \'90s GM). Spec appears to make the one that is on CNS\'s website.....(unless there is another manf of blue PP\'s out there), but it isn\'t like 10.5\" is an uncommon size. Several M5 board members are running these very successfully on header/tuned or SC\'d units. i can answer some questions on it as I did a lot of research on these before buying, but the M5board has a ton of threads on these (both good and bad, same as all clutches). Vs the 9.45\" lightweight from Dinan, or similar, these offer the opportunities for much more torque hold on launch.