When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $113.11
- For 1999-2009 Ford F-250 (Check Threads-Only for 14x2)
- For 1999-2016 Ford F-250 Super Duty (Check Threads-Only for 14x2)
- For 1999-2009 2011-2016 Ford F-350 (Check Threads-Only for 14x2)
- For 1999-2016 Ford F-350 Super Duty (Check Threads-Only for 14x2)
- For 2000-2002 Ford Excursion​
Compatible Vehicles:
- For 1999-2009 Ford F-250 (Check Threads-Only for 14x2)
- For 1999-2016 Ford F-250 Super Duty (Check Threads-Only for 14x2)
- For 1999-2009 2011-2016 Ford F-350 (Check Threads-Only for 14x2)
- For 1999-2016 Ford F-350 Super Duty (Check Threads-Only for 14x2)
- For 2000-2002 Ford Excursion​
Note: Pls check your factory thread first, can be 14x1.5 or 14x2, only work with 14x2 studs
these spacers only work with M14x2 studs, If you need M14x1.5 studs:https://www.ebay.com/itm/264882003872?
--If you dont't know the specific of your vehicle, pls confrim by following the below steps:
1) Check Vehicle Bolt Pattern/ PCD
For 4-lug, 6-lug, 8-lug, measure the segment from the center of a bolt hole to the center of another hole.
5-lug is different, you need to measure the segment from the outermost point (not center point) of a bolt hole to the center of another hole.
Take 5 lug for example, if the length of segment as measured in the picture is 5.5"/ 127mm, and as these are 5 lugs, then the bolt pattern is 5.5"/ 127mm.
2) Check Vehicle Hub Bore Size
Measure the diameter of the center bore, make sure the spacer's diameter is the same as or greater than the axle diameter.
3) Check Vehicle Thread Pitch
There are different types of studs, sunch as M14X1.5, M12X1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
--Measure the fender gap to choose suitable thickness.
Line up a straight edge ruler against the siadewall of the tire, use the measure device to measure from the inside of the ruler to the inner fender lip.
Please take multiple measurements and use the smallest data point (The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm)
--Step for Installation Wheel Spacers
Item SpecificsManufacturer Part Number E819508WAYBrand EWAY-motorWheel bolt pattern 8x170mmVehicle bolt pattern 8x170mmLug Patterns 8LugsPackage Included 4pcsColor BlackStuds M14x2Thickness 2"Manufacturer Warranty 1 YearStud Grade 10.9Inner Diameter 130mmMaterial High Quality t6 6061 Billet AluminumSurface Finish CNC Machined Polished Aluminum FinishCondition NewShip from Ontario,CaliforniaCompatibility Fits Ford F-250 F-350 Super Duty ExcursionHubcentirc NoPackage Weight 24.96lbInterchange Part Number For 1999 2000 2001 2002 Ford F-250 Super DutyOther Part Number For 1999 2000 2001 2002 Ford F-350 Super Duty Ford ExcursionSuperseded Part Number 8 lug-8x170-2 inch-50mm-CB130mm-M14x2Torqued Down By Hand At 85-90 FT/LBPlacement on Vehicle FrontNote Only Fit 14x2 studs, pls confirm
Payment 1. Package handling takes about 1 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.2.All domestic orders will be shipped via DHL,USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 3-7 business days.3.Local pick up is not available.4.Orders Will be shipped out from our warehouse in US.5.International Buyers C Please Note:a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.Warranty 1,We stand behind every product we sell.2,All of our brand new items come with a 60-Days money-back guarantee.3,We define the item as defective only if it doesn't function as described.4,It is the buyer's responsibility to understand the item description before bidding.5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.6,We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.7,Shipping & handling cost are not refundable.8,Man-made damage by abuse or wrong operation is not covered by this warranty.9,No product liability insurance is assumed.Returns 1.All of our brand new items come with a 60-Days money-back guarantee.2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.5.Shipping& handling cost are not refundable.6.Man-made damage by abuse or wrong operation is not covered by this warranty.7.No product liability insurance is assumed.8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.Payments
We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.
Feedback 1. We will leave positive feedback once we get your payment.2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR. DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home wheel lug nut Leveling lift kit wheel hub bearing wheel spacers suspension kit brake pads Brake Rotor and Pads steering knuckle-7 OtherHot Item 4Pcs 6x5.5 Wheel Spacers 3" For GMC Sierra 1500 Chevrolet Silverado 1500 Tahoe USD 140.88 32Pcs M14x1.5 Chrome 7 Spline Lug Nuts + 2 Keys For Honda Odyssey Hummer H2 USD 34.00 4x 2" 8x170 Wheel Spacers 14x2 Studs Fits Ford F-250 F-350 Super Duty Excursion USD 122.68 (4) 1.5'' 6 Lug Hubcentric Black Wheel Spacers 6x5.5 for Toyota Tacoma 4Runner USD 87.99 4x156 2 inch (4) ATV Wheel Spacers 12x1.5 Fits Polaris Ranger RZR XP 1000 900 USD 93.52 DeliveryNew List Item For 2007 2008 2009 2010 Nissan Sentra Front Ceramic Brake Rotors And Pads USD 93.89 Set of Leveling Lift Kit 2" Front & 2" Rear Fits Toyota Tundra 2007-2021 2015 USD 69.26 Set of Leveling Lift Kit 2-3" Front 3" Rear For Toyota Tacoma 2005-2018 4WD 2014 USD 68.62 2x Leveling Lift Kit 1.5" Front Fits Toyota 4Runner FJ Cruiser 2005-2021 Silver USD 35.08 Set of Leveling Lift Kit 2.5" Front & 2" Rear Fits Toyota Tundra 2000-2006 2004 USD 71.26 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us 4x 2" 8x170 Wheel Spacers 14x2 Studs Fits Ford F-250 F-350 Super Duty ExcursionCompatible Vehicles:
- For 1999-2009 Ford F-250 (Check Threads-Only for 14x2)
- For 1999-2016 Ford F-250 Super Duty (Check Threads-Only for 14x2)
- For 1999-2009 2011-2016 Ford F-350 (Check Threads-Only for 14x2)
- For 1999-2016 Ford F-350 Super Duty (Check Threads-Only for 14x2)
- For 2000-2002 Ford Excursion​
Note: Pls check your factory thread first, can be 14x1.5 or 14x2, only work with 14x2 studs
these spacers only work with M14x2 studs, If you need M14x1.5 studs:https://www.ebay.com/itm/264882003872?
--If you dont't know the specific of your vehicle, pls confrim by following the below steps:
1) Check Vehicle Bolt Pattern/ PCD
For 4-lug, 6-lug, 8-lug, measure the segment from the center of a bolt hole to the center of another hole.
5-lug is different, you need to measure the segment from the outermost point (not center point) of a bolt hole to the center of another hole.
Take 5 lug for example, if the length of segment as measured in the picture is 5.5"/ 127mm, and as these are 5 lugs, then the bolt pattern is 5.5"/ 127mm.
2) Check Vehicle Hub Bore Size
Measure the diameter of the center bore, make sure the spacer's diameter is the same as or greater than the axle diameter.
3) Check Vehicle Thread Pitch
There are different types of studs, sunch as M14X1.5, M12X1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
--Measure the fender gap to choose suitable thickness.
Line up a straight edge ruler against the siadewall of the tire, use the measure device to measure from the inside of the ruler to the inner fender lip.
Please take multiple measurements and use the smallest data point (The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm)
--Step for Installation Wheel Spacers
Item SpecificsManufacturer Part Number :E819508WAYBrand :EWAY-motorWheel bolt pattern :8x170mmVehicle bolt pattern :8x170mmLug Patterns :8LugsPackage Included :4pcsColor :BlackStuds :M14x2Thickness :2"Manufacturer Warranty :1 YearStud Grade :10.9Inner Diameter :130mmMaterial :High Quality t6 6061 Billet AluminumSurface Finish :CNC Machined Polished Aluminum FinishCondition :NewShip from :Ontario,CaliforniaCompatibility :Fits Ford F-250 F-350 Super Duty ExcursionHubcentirc :NoPackage Weight :24.96lbInterchange Part Number :For 1999 2000 2001 2002 Ford F-250 Super DutyOther Part Number :For 1999 2000 2001 2002 Ford F-350 Super Duty Ford ExcursionSuperseded Part Number :8 lug-8x170-2 inch-50mm-CB130mm-M14x2Torqued Down By Hand At :85-90 FT/LBPlacement on Vehicle :FrontNote :Only Fit 14x2 studs, pls confirmPaymentWarrantyReturnsPaymentsFeedback 1. Package handling takes about 1 business days at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.2.All domestic orders will be shipped via DHL,USPS, UPS or Fedex from our US warehouse and usually arrives to your door in about 3-7 business days.3.Local pick up is not available.4.Orders Will be shipped out from our warehouse in US.5.International Buyers C Please Note:a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.b. Please check with your country customs office to determine what these additional costs will be prior to bidding/buying. 1,We stand behind every product we sell.2,All of our brand new items come with a 60-Days money-back guarantee.3,We define the item as defective only if it doesn't function as described.4,It is the buyer's responsibility to understand the item description before bidding.5,We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.6,We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.7,Shipping & handling cost are not refundable.8,Man-made damage by abuse or wrong operation is not covered by this warranty.9,No product liability insurance is assumed. 1.All of our brand new items come with a 60-Days money-back guarantee.2.We define the item as defective only if it doesn't function as described, It is the buyer's responsibility to understand the item description before bidding.3.We will replace the defective items, provided that they are in stock within the warranty period posted with the listing and the buyer return the original item and pay for the S&H cost for the replacement.4.We will refund the purchase price if the replacement is not available or buyer prefers a refund and send the original item back at his/her own cost.5.Shipping& handling cost are not refundable.6.Man-made damage by abuse or wrong operation is not covered by this warranty.7.No product liability insurance is assumed.8.Refunds will be credited within 5 to 7 business days of receiving the return. When we've received and processed the return, we will refund the applicable amount minus any Recovery Fees (See Details Below) for the amount you paid for the item(s), plus any applicable sales tax.
We only accept payment through PayPal. You can open a Paypal account at www.paypal.com.
1. We will leave positive feedback once we get your payment.2. If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.3. If you are satisfied with the product you received, please leave us positive feedback and 5 scores DSR.All rights reserved.