5x5 to 8x7.1 / 5x127 to 8x180 US Wheel Adapters x 2 14x1.5 studs 1.75" thick 5-8 for Sale


When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Price: $219.99

5x114.3 to 5x120.7 / 5x4.5 to 5x4.75 USA Wheel Adapters 19mm 3/4" Spacer 74mm x4 5x5 to 8x7.1 / 5x127 to 8x180 US Wheel Adapters x 2 pcs. 14x1.5 studs 1.75" thick 5 to 8 Lug

NOTICE!! This is a built to order item listed as No Return. Disregard any mention of return later in this listing.If you buy the wrong item for whatever reason, you wreck your car, your wheels get stolen, someone told you the wrong measurement, bought 2 thinking it was 4, found a better price...Whatever it is still NO Return.We are professionals are are willing to help you get the right item BEFORE you purchase but you need to contact us First.

The Fitment Guide is Incomplete if you are unsure about anything, pleaseask before you buy!

Part # = USA-5500-8180-D9-71.5

Vehicle Bolt Pattern = 5x127 / 5x5

Wheel Bolt Pattern = 8x180

Adapter Center Bore = 71.5mm

Adapter Studs = 14x1.5

Thickness = 1.75 inch

Quantity = 2


Need Help?

eBay no longer allows our phone number to be displayed.

If you have any questions,please message us and get the answers before your purchase.

The Following Important Information Applies to Your Purchase Whether You Read It or Not

It is your responsibility to ensure that the written description which includes the bolt pattern of the vehicle, bolt pattern of the wheel, center bore and stud / lug nutsize are all correct for your application.

Shipping may beincluded but is not free, if you purchase the wrong item it will cost to get it corrected.

If you are not sure about anything please ask.

We are available with professional advice.

8-4 PST M-F

Installation

Installation is of critical importance with wheel adapters.

Professional installation is strongly recommended.

Slip fit the adapter on thewheel and the vehicle before you bolt anything on to ensure that you have proper fitment.

Mating surfaces must be clean and free of rust andobstructions allowing for the adapter to sit flat on the rotor, and the wheel flat on the face of the adapter.

Make Sure the lug nuts or studs from the vehicle do not touch the back of the wheel.

Torque by hand, do not use impact gun for installation.

Improper Installation Voids All Warranties.

Bolt Patterns

Bolt patterns must be correct, if you are not sure, please get help.

If you purchase the wrong bolt pattern it will cost you for postage and handling to get them exchanged.

The bolt pattern of the vehicle comes first in the listing and the wheel bolt pattern is listed after the word "to".

There is no such thing as a universal wheel, it is what people callwheels that have two bolt patterns, but there is a possibility of 10 or more.

3, 5 and 7 lug bolt patterns measure differently than 4, 6, or8 lug

Vehicle Studs

If the studson your vehicle are longer than the adapter is thick you may need to trim them down so they do not touch the back of the wheel.

Factory lug nuts are often too big to recess in an adapter so they may need to be replaced.

Studs /Lug Nuts

These wheel adapters require a conical seat lug nut or bolt.

One set of open ended conical seat bulgelug nuts are included with the adapters.

The lug nuts included will be in the same size as the studs in the adapter unless otherwise requested or advertised above.

Different wheels require different kinds of lug nuts, make sure you get the proper lug nuts for your wheels in the right size to fit the studs in the adapter.

Factory bolts from Mercedes, VW and Audi have a radius seat (also called ball seat) lug bolt. Radius seat lug bolts are Not compatible with these adapters that require a conical seat they Must be replaced with a conical seat fastener or failure can occur.

Custom built adapters are available that accept radius seat bolts by special request at additional cost.

Center Bore

The center hole of the adapter must be large enough to fit over the hub of the vehicle. It can be larger, which is called lug centric, where the conical seat lug nuts center the adapter on the hub.

Hub Centric

Hub Centric refers to an adapter where the center hole of the adapter perfectly fits over the hub sticking out on the vehicle.

Wheel-centric

Wheel centric is available for extra cost in most applicationsfor the person that wants the best and closest to factory fit that you can get, or youwant extra strength, then wheel centric is optional.

If you have wheels that require a radius seat lug nut, it is strongly recommended.

Thickness

All adapters are also spacers because they require some thickness to be able to bolt onto the vehicle and then hold the wheel.

The minimum thickness we make is 19 mm a.k.a. 3/4 inch and we go up to 5 inches thick.

InstallingTwo-Piece Adapters

All the above still applies, but with a two piece adapterMake Sure thehub,studs or lug nuts from the vehicle donot contact the second piece of the adapter or it will cause failure.3/4" hex lug nuts are required to fit the vehicle. (Not included)

The black bolts that hold the two pieces together should be torqued to 60 to65 foot-pounds and I also recommend using blue removable Loctite on these bolts.

Pictures

The pictures are of stock adapters and may not look exactly like what you get due to differences in bolt patterns and center bore sizes.

You will receive the item as described in the written description of the listing.

Prices

Our prices are higher than many other sellers with similar products because they are just that, similar products.

The cheap wheel adapters you see are made inChina.

We are a US manufacturer based in San Bernardino California where we use US sourced billet aluminum providingthe best materials for construction of our wheel adapters.

The US sourced aluminum that we use for construction is superior to that from China and it costs more for labor in the US which is why our wheel adapters cost more.

Authenticity

Beware of unscrupulous sellers of wheel adapters (there are many)who would imply or even straight up lie by sayingthat their adapters are US-made, but they're Chinese imports,these are truly US-made wheel adapters made by US citizens from US sourced aluminum in our machineshop in San Bernardino California

Warranty

Improper Installation or alterationVoids All Warranties.If you have a problem with your purchase please contact us so we can help you resolve the issue.We do Not guarantee that the part you buy will fit your car, if you ask us specifically and give us correct information we can help you get the right part.We guarantee our parts are as described in the written part of the listing, please read carefully and ask any questions you have before purchase.

We offer a limited lifetime warranty on our US-made wheel adapters.

This warranty covers the aluminum construction of the adapter, if it should ever fail we will replace the defective part.

This warranty is limited to part replacement only, user agrees to assume all other responsibility and or liability arising from use ofthis product.

Wheel studs are a wear part, and are replaceable in the adapter,there are many ways to damage them that have nothing to do with construction so wheel studs are not covered under this warranty, if you need stud replacements we have them available for sale online.

NO Refunds

NO Exchanges

Thank You And Have a Blessed Day

Contact


inkFrog Analytics


Parts Search:


Follow