When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $73.58
Specifications
Condition:Brand New
Quantity: 4pcs
Thickness: 1"
Hub Bore Size: 73.1mm
Vehicle Bolt Pattern: 5x4.5
Wheel Bolt Pattern: 5x5.5
Thread Pitch: 1/2"x20
Material：Aerospace-grade 6061 aluminum alloy
Compatible vehicles:
2007-2014 Edge
1991-2022 Explorer
1994-2014 M-u-s-t-a-n-g(5 Lug)
2008-2022 Taurus
1991-2011 Ranger
1984-2001 Cherokee
2002-2012 Liberty
1993-1998 Grand Cherokee
1986-1992 Comanche
1987-2006 Wrangler
2009-2015 MKS
1991-2012 Town Car
2007-2015 MKX
1994-2009 Mazd-B4000
Package include:
4Pcs Wheel Spacers Adapters
How to choose the correct wheel spacers:
STEP. Check 3 specifications
The following is the easy and simple way tocheck the bolt pattern/PCD, center/hub bore and thread pitch. If you donot sure, please just message us with the year, make and model of vehicle.
1). Check Vehicle Bolt Pattern/PCD For 4-lug, 6-lug, 8-lug, measure the segment from the CENTER of a bolt hole TO the CENTER of another hole. 5 lug is different, you need to measure the back of the hole to the center of the second bolt hole (not center point).(See Bolt Pattern Diagram below)
2). Check Vehicle Hub/Center Bore Size Measure the diam of the center bore on hub, make sure the spacer's diam is equal to or bigger than the axle diameter.
3). Check Vehicle Thread Pitch There are different types of studs, such as M12x1.25, M14x1.5, M12x1.5, 1/2"x20, 9/16"x18, please make sure the studs of wheel spacers is the same as the vehicle's, otherwise the spacer will not fit.
How to install the wheel spacers:
1).IMPORTANT - ADAPTER OR SPACER MUST SIT FLUSH AGAINST VEHICLE HUB, AND WHEEL MUST SIT FLUSH AGAINST ADAPTER OR SPACER!Stock studs must be trimmed down (shortened) if they protrude past the surface of the adapter or spacer. If not, vibration or other problems can occur. Some wheels have pockets that may allow for no stud trimming. If not, studs MUST be trimmed.
2). Make sure the mounting surface (vehicle hub) is clean and flat, and remove all retaining clips.
3). Install the adapter to the vehicle, with the proper lug nuts, and torque to manufacturer’s wheel torque specs.
4). Install the wheel to the adapter by torquing to the vehicle manufacturer’s wheel torque specifications (again, max 140 ft-lbs). Please assure the proper thread engagement (6 to 8 full turns) on lug nuts or bolts.
5). Drive the vehicle. If no problems (noise, vibration, anything out of the ordinary), drive about 5 miles, then re-torque the lug nuts attaching the spacer or adapter to the hub.
It is buyer responsibility to provide correct shipping address before purchasing.
Buyer is responsible for any reshipping cost due to wrong or undeliverable addresses.入Payment Items are shipped within 1-2 business days.
Damaged item due to shipping must reported to us within 48 hours of delivery in order to place claim with shipping company. Returns1：contact seller first by email2: send images : including outer package & scan label & item itself & with complete accessories etc
necessary condition:
one : Items have not been used.
two : outer package without any damage.3: For returns, please contact customer service for a return shipping label.
4: item delivered -payment repay1Returns or exchanges will be subject to a 15% restocking fee on the original purchase.2. Returns or exchanges due to shipping issues will be borne by the sellerPriority：
In the following cases, the shipping cost will be undertake by buyers
1: order accidently
2: find better price
3: change mindNotice：
accessory missing/ quality issue/ shipping damage.etc
please contact us for good solution first instead of opening return dispute. Our professional customer service team can give you a satisfactory solution! If you have any problem, please feel free to contact us from Monday to Friday.
If you want to customize at bulk order, please contact us to find cheaper price.