When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $94.04
- 1979-1983 Dodge Ramcharger
- 2005-2011 Dodge Dakota
- 2004-2009 Dodge Durango
- 1994-2001 Dodge Ram 1500
- 2002-2010 Dodge Ram 1500 (Requires 9/16"x18 Nuts)
- 1960-1979 Ford F-100
- 1980-1983 Ford F-100 (4WD Only)
- 1975-1996 Ford F-150
- 1992-2006 Ford E-150 Econoline
- 1992-1996 Ford Bronco
Applications:
- 1979-1983 Dodge Ramcharger
- 2005-2011 Dodge Dakota
- 2004-2009 Dodge Durango
- 1994-2001 Dodge Ram 1500
- 2002-2010 Dodge Ram 1500 (Requires 9/16"x18 Nuts)
- 1960-1979 Ford F-100
- 1980-1983 Ford F-100 (4WD Only)
- 1975-1996 Ford F-150
- 1992-2006 Ford E-150 Econoline
- 1992-1996 Ford Bronco
Feature:
- Precisely Machined: Forged 6061 T6 Aluminum CNC machined heavy duty spacers and studs for safety with ISO/DIN 10.9 (SAE Grade 8).
- Forged spacers are more heavy duty and Durable than casting, stronger and safety package with Foam inner.
- It's recommended that buyers take the proper measurements to ensure that by adding the spacer, their wheel/tire won't hit the fender or any other part of the vehicle.
- Be sure to torque the lug nuts to manufacturer specifications.
- Avoid an impact wrench; improper usage may cause damage to components.
- Re-torque all lug nuts after 50-100 miles of driving, then again every 2-3,000 miles.
- No returns or exchange once installed.
How to measure the fender gap to choose suitable thickness?
(1)Line up a straight edge ruler against the sidewall of the tire, use the measuring device to measure from the inside of the ruler to the inner fender lip.
(2)Please take multiple measurements and use the smallest data point.(The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm)
How to Install Wheel Spacers?
- Always make sure you are installing wheel spacers/adapters that are designed for your vehicle. Never use wheel spacers/adapters which do not fit properly.
- Park your vehicle on a hard, level surface. Break loose, but DO NOT REMOVE, the lug nuts that fasten the wheel to the hub with the tire iron or breaker bar BEFORE raising up your vehicle.
- Slide an automotive jack under the vehicle at an appropriate lift point and raise the vehicle enough to lift a single tire completely off the ground. Place a jack stand under your vehicle, and lower your vehicle on to the jack stand. Never work on or under a vehicle which is lifted only with an automotive jack, because it can easily fall or tip, causing injury or death.
- Finish removing the lug nuts on the raised tire. Slide the wheel off the hub and set it aside. Spray degreaser on the lug studs and wipe them down with a rag. If the hub is dirty, rusted, or pitted use a wire brush to clean up the surface. Wipe down the entire hub surface, making sure it is clean and smooth.
- If you are using Loctite to secure your spacer/adapter, place a drop of loctite on each wheel stud. Place your wheel spacer/adapter on to the hub, with the holes in the spacer lined up with the wheel studs, making sure the wheel spacer seats firmly against the hub. Attach the wheel spacer to your hub using the included bolts. Tighten the nuts that hold the spacer in place to the appropriate torque specification using a torque wrench. Do not overtighten or undertighten the nuts. If you have difficulty tightening the nuts because the hubs turn, have an assistant gently press the brake pedal to prevent the hub from turning.
- Slide the wheel onto the studs protruding from the wheel spacer/adapter so that it seats firmly against the spacer/adapter. Install your original lug nuts and tighten them to the appropriate torque specification. Tighten bolts in a star pattern to ensure proper seating of the wheel onto the spacer. Raise the vehicle with the automotive jack, remove the jack stand and lower the vehicle onto the newly installed wheel.
- Repeat steps 3-6 for each wheel.
- Double check that all lug nuts are tightened to the manufacturer’s specification MINUS 10% with a properly calibrated torque wrench in a crisscross, star pattern. In our experience tightening all the way to manufacturer torque specifications can occasionally damage/break /weaken the studs on the wheel spacer. However it is always a good idea to routinely check the tightness of the lug nuts, especially soon after installation.
Item SpecificsManufacturer Part Number :LJT819500LJTBrand :LJTMaterial :High Quality t6 6061 Billet AluminumThickness :1.5 inch/ 38mmWheel bolt pattern :5x5" or 5x127mmVehicle bolt pattern :5x5.5" or 5x139.7mmAdapter Stud Size :1/2"x20 or 1/2" UNFHub/Center Bore :87.1mmWarranty :1 yearTorqued Down By Hand At :85 FT/LBSLug Patterns :5LugsCondition :NewStud Grade :10.9Quantity :4pcsApplication :Fits Dodge Ram 1500 Durango Ford F-150 BroncoColor :SliverPackage Weight :18.7lbPlace of delivery :Ontario,CaliforniaInterchange Part Number :5x139.7 To 5x127 wheel adaptersOther Part Number : 1.5" inch 38mm Thick Wheel Spacer AdapterSuperseded Part Number :Jeep CJ7 Ford F-150 Dodge Ram 1500 Dakota DurangoNote :Only Work with 5x5" (5x127mm) Wheels
Payment
We accept paypal only
We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!
About Shipping1.Items will be shipped within 24 hours after getting your verified payment.
2.US Storage& UNITED STATES by fast shipping.We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors.Please feel free to contact us if you haven't receive the item after the estimated shipping time
About Return• We will gladly accept your return within 30 days of the original purchase.
• Our return process is simple and fast:
1. We will pay for the return shipping label if you received a broken / defective item(s) or the item(s) doesn't match our description. As soon as we receive the item(s) back we will process a refund for the item(s) which was/were returned.
2. You will be required to pay for the return shipping label if you changed your mind or no longer need the item(s). As soon as we receive the item(s) back we will process a refund for the item(s) which was/were returned.
• If we'll receive a package back because of the incorrect address, the refund will be processed excluding our shipping cost.
Fitment NotesPlease consult with your mechanic, or contact us, if you are not sure of fitment for your vehicle. READ the notes on the compatibility chart.
We are not responsible for incompatible items due to buyer's error, and a restocking fee as well as shipping charges will be deducted from returns or exchanges.
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Shop CategoryStore Home Brake Rotors & Pads◈Brake Rotors◈Brake Pads◈Brake Rotors and Pads Towing Mirrors Wheel Hub Bearing Timing Belt Kits Door Handle Wheel Spacers Fuel Pumps Water Pump Fuel Injector Car Seat Cover Remote Key Car Cover Suspension Kit◈suspension kit-cj◈Suspension Kit okx◈Suspension Kit fu Leveling lift kit Wheel Lug Nuts ABS Wheel Speed SensorHot Item Pair Manual Towing Mirrors for 99-07 Chevy Silverado GMC Sierra Truck 1500 2500 USD 66.99 Front Ceramic Brake Pads For Acura ILX Honda Accord CR-V Element Fit Pilot USD 30.07 Rear Ceramic Brake Pads For Acura Integra Honda Accord Suzuki Kizashi USD 22.17 Rear Ceramic Brake Pads For Infiniti EX35 FX37 G35 JX35 Nissan 350Z Suzuki USD 22.52 Rear Ceramic Brake Pads For Audi A4 TT A6 Volkswagen Beetle Jetta USD 20.51 DeliveryNew List Item Brake Disc Rotors Front And Rear Kit For 2012-2017 Toyota Camry SE 2.5L Slotted USD 141.87 [Left] Side Mirror Black Power Non-Folding Heated Fits For 06-10 Hyundai Sonata USD 48.45 New Front Stabilizer / Sway Bar End Link 2 Piece Steering Kit For 2007-11 Nissan USD 25.78 Front & Rear Metallic Brake Pads For 2006-2008 Dodge Ram 1500 2500 3500 USD 48.89 2pcs Upstream&Down for 08-10 Mazda 5 2.3L Air Fuel Ratio Oxygen o2 02 Sensor USD 52.20 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout Us 5x5.5 to 5x5 1.5" (4) Wheel Spacers Fits Dodge Ram 1500 Durango Dakota Ford F150Applications:
- 1979-1983 Dodge Ramcharger
- 2005-2011 Dodge Dakota
- 2004-2009 Dodge Durango
- 1994-2001 Dodge Ram 1500
- 2002-2010 Dodge Ram 1500 (Requires 9/16"x18 Nuts)
- 1960-1979 Ford F-100
- 1980-1983 Ford F-100 (4WD Only)
- 1975-1996 Ford F-150
- 1992-2006 Ford E-150 Econoline
- 1992-1996 Ford Bronco
Feature:
- Precisely Machined: Forged 6061 T6 Aluminum CNC machined heavy duty spacers and studs for safety with ISO/DIN 10.9 (SAE Grade 8).
- Forged spacers are more heavy duty and Durable than casting, stronger and safety package with Foam inner.
- It's recommended that buyers take the proper measurements to ensure that by adding the spacer, their wheel/tire won't hit the fender or any other part of the vehicle.
- Be sure to torque the lug nuts to manufacturer specifications.
- Avoid an impact wrench; improper usage may cause damage to components.
- Re-torque all lug nuts after 50-100 miles of driving, then again every 2-3,000 miles.
- No returns or exchange once installed.
How to measure the fender gap to choose suitable thickness?
(1)Line up a straight edge ruler against the sidewall of the tire, use the measuring device to measure from the inside of the ruler to the inner fender lip.
(2)Please take multiple measurements and use the smallest data point.(The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm)
How to Install Wheel Spacers?
- Always make sure you are installing wheel spacers/adapters that are designed for your vehicle. Never use wheel spacers/adapters which do not fit properly.
- Park your vehicle on a hard, level surface. Break loose, but DO NOT REMOVE, the lug nuts that fasten the wheel to the hub with the tire iron or breaker bar BEFORE raising up your vehicle.
- Slide an automotive jack under the vehicle at an appropriate lift point and raise the vehicle enough to lift a single tire completely off the ground. Place a jack stand under your vehicle, and lower your vehicle on to the jack stand. Never work on or under a vehicle which is lifted only with an automotive jack, because it can easily fall or tip, causing injury or death.
- Finish removing the lug nuts on the raised tire. Slide the wheel off the hub and set it aside. Spray degreaser on the lug studs and wipe them down with a rag. If the hub is dirty, rusted, or pitted use a wire brush to clean up the surface. Wipe down the entire hub surface, making sure it is clean and smooth.
- If you are using Loctite to secure your spacer/adapter, place a drop of loctite on each wheel stud. Place your wheel spacer/adapter on to the hub, with the holes in the spacer lined up with the wheel studs, making sure the wheel spacer seats firmly against the hub. Attach the wheel spacer to your hub using the included bolts. Tighten the nuts that hold the spacer in place to the appropriate torque specification using a torque wrench. Do not overtighten or undertighten the nuts. If you have difficulty tightening the nuts because the hubs turn, have an assistant gently press the brake pedal to prevent the hub from turning.
- Slide the wheel onto the studs protruding from the wheel spacer/adapter so that it seats firmly against the spacer/adapter. Install your original lug nuts and tighten them to the appropriate torque specification. Tighten bolts in a star pattern to ensure proper seating of the wheel onto the spacer. Raise the vehicle with the automotive jack, remove the jack stand and lower the vehicle onto the newly installed wheel.
- Repeat steps 3-6 for each wheel.
- Double check that all lug nuts are tightened to the manufacturer’s specification MINUS 10% with a properly calibrated torque wrench in a crisscross, star pattern. In our experience tightening all the way to manufacturer torque specifications can occasionally damage/break /weaken the studs on the wheel spacer. However it is always a good idea to routinely check the tightness of the lug nuts, especially soon after installation.
PaymentAbout ShippingAbout ReturnFitment Notes
We accept paypal only
We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address!
1.Items will be shipped within 24 hours after getting your verified payment.
2.US Storage& UNITED STATES by fast shipping.We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors.Please feel free to contact us if you haven't receive the item after the estimated shipping time
• We will gladly accept your return within 30 days of the original purchase.
• Our return process is simple and fast:
1. We will pay for the return shipping label if you received a broken / defective item(s) or the item(s) doesn't match our description. As soon as we receive the item(s) back we will process a refund for the item(s) which was/were returned.
2. You will be required to pay for the return shipping label if you changed your mind or no longer need the item(s). As soon as we receive the item(s) back we will process a refund for the item(s) which was/were returned.
• If we'll receive a package back because of the incorrect address, the refund will be processed excluding our shipping cost.
Please consult with your mechanic, or contact us, if you are not sure of fitment for your vehicle. READ the notes on the compatibility chart.
We are not responsible for incompatible items due to buyer's error, and a restocking fee as well as shipping charges will be deducted from returns or exchanges.
All right reserved.