3 MM | DODGE CHRYSLER | 5X115MM | HUB CENTRIC 71.5 FLAT WHEEL SPACERS | ADAPTERS for Sale

Price: $39

This item has been shown times.



5LUG WHEEL SPACERS 5X115MM (3 MM =

3/16")WIDE FLAT

Attention Please be Advised: If applied to the vehicle's front

hubs, flat spacers can give your vehicle a "Back & Forth"

movement in the steering wheel particularly between 45MPH

& 60MPH. It is a scientific, dynamic (2 )SPACERS (One Pair)

Bolt Pattern: 5X115MM

Width: 3 MM (EACH) (approximately 3/16 of an inch)

Hub Centric:Hub Centric71.5 TO HUB ONLY

Stud -- This is a FLAT SPACER

Lug -- Extra Lug Nuts not needed

6061-T6 Billet Aluminum

ATTENTION: When applying spacers it may require you to install longer studs in your

vehicle's hubs in order to get the proper amount of turns of your lug nuts to properly

mount your wheels. Minimum 5 turns!!


For a complete set of four spacers, please put the # 2 in

quantity. Thank you!

Helpful Hints:

#1. Spacers have the same bolt pattern hub side and wheel side.

#2. Adapters change the bolt pattern wheel side (EXAMPLE: 5x4.5 (hub) to 5x5 (wheel))

#3. We offer TECH SUPPORT. Just go to "Ask a Question" and the guys will be glad to help with any questions you may have on fitment.

#4. When ordering, be sure to include the Year, Make & Model of the vehicle on which the spacers are going to be installed. This gives us a chance to help make sure you are ordering correctly even though it is the end user's responsibility to ensure that this is the correct part for their custom application.

#5. If the spacer/adapter width is thinner than the length of the studs on your hub, it will require you to trim your hub's studs.There can be no part of the stud passing through the face of the spacer wheel side. You must have a clear, clean mounting surface for your wheel or failure will occur.





inkFrog Analytics




Parts Search:


Follow