When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $66.49
Welcome to our store!
To avoid you buying the wrong parts, DO CHECK the compatible chart above before placing order.
-
Choose a vehicle from the "My Garage" list. Or
-
Enter your vehicle's details withYear / Make / Model / Trim / Engine.Or
-
Contact us: Ask us for double check.
Fits
- Fits 2010 Buick Allure Only Rear
- Fits 2010-2016 Buick Lacrosse Front or Rear
- Fits 2011-2017 Buick Regal Front or Rear
- Fits 2014-2016 Cadillac CTS Front For AWD Only
- Fits 2013-2017 Cadillac XTS Front or Rear (2017 Except Brake Code J55)
- Fits 2010-2017 Chevrolet Equinox Only Front
- Fits 2014-2017 Chevrolet Impala Front or Rear
- Fits 2013-2015 Chevrolet Malibu Front or Rear
- Fits 2016 Chevrolet Malibu Limited Front or Rear
- Fits 2010-2017 GMC Terrain Only Front
- Fits 2010-2011 Saab 9-5 Front or Rear
Product Introduction
- Brand New Wheel Hub Assembly
- Direct replacement
- Built to strict quality control standards
- Replaces dealer part numbers:513288, WE60838, BR930777, 951-301, WA513288, 13502785, 13502886, 13504972, 7467839
Features
- Wheel studs already installed
- Fits 5 LugsWheels
- Includes ABS with Tone Ring Sensor
Package Include
- 2 Pcs wheel hub bearing
The most common symptoms of a worn wheel hub bearing include
- Strange humming, rumbling, or growling noise
- Side pulls during brake application
- Uneven brake pad wear
- Wheel vibration and wobble
How To Remove a Wheel Hub Assembly?
- With the vehicle still on the ground, use a breaker baror impact wrench to loosen the wheel hub nut, then the lug nuts.
-
Jack up the vehicle and insert your jack stands.
-
Remove the wheel and set it aside.
-
Remove the brake caliper and place it somewhere that does not put stress on the brake line.
-
Remove the rotor.
-
Remove the axle nut.
-
Unplug the hub assembly cord.
-
Remove any bolts on the wheel hub assembly.
-
Follow the manufacturer’s recommendations for removing the old hub assembly. Many require special tools that should be used to avoid damaging other parts of the vehicle. Seriously, the wheel bearing puller tool will make this job much simpler.
-
As you remove the wheel bearing, be cognizant of the axle and avoid letting it drop, get dirty, or put stress on any other parts.
-
Clean off any corrosion found on the involved parts.
-
To replace the old hub with the new hub, insert the new hub (with a press, if necessary), replace the old axle nut, and follow the previous steps in reverse.
Tips For Hub Removal
Wheel hub assemblies are often extremely stubborn to remove. If you’re already in the middle of the job but don’t have a puller tool, these other tools and methods might be able to help. Just use extreme caution not to damage anything, and always use necessary safety precautions.
- Slide hammer
- Rubber mallet
- Heat and metal hammer
- Penetrating spray
Precautions
- To ensure maximum safety and reliability, it is recommended that you check the wheel bearings frequently, regardless of the age of the vehicle - look out for early warning signs of wear on the bearings: this includes any friction noise when turning or unusual deceleration of the suspension combination wheel when turning. For rear-wheel drive vehicles it is recommended that the front wheel bearings be lubricated when the vehicle reaches 38,000 kilometers. When replacing the brake system, inspect the bearings and replace the oil seals.
- If you hear a noise coming from the wheel bearing area, it is important to first find out where the noise is occurring. There are a number of moving parts that may be generating the noise, and it is also possible that some of the rotating parts are in contact with the non-rotating parts.
- Because the front hub causes similar operating conditions for bearing failure on both sides, it is recommended that bearings be replaced in pairs, even if only one is broken.
- Hub bearings are sensitive and in any case require the use of the correct method and appropriate tools.
- Bearings should be mounted in a clean and tidy environment, small particles entering the bearing will also shorten the service life of the bearing.
- For wheel bearing units, do not attempt to dismantle the wheel bearings or adjust the seals of the wheel units, as this may damage the seals leading to the ingress of water or dust.
Notice
- Please check your vehicle compatibility before buying.
- Please check yourold number and pictures before buying
- Any modifications to an item of any kind before contacting us will void any and all warranty coverage for this item. Please contact us before modifying the part so that we have the opportunity to correct the situation.
Item SpecificsUPC Does not applyBrand CSsunnyManufacturer Part Number 11028955Interchange Part Number WE60838 BR930777 951-301Placement on Vehicle FrontABS Sensor Has ABS with Tone Ring SensorManufacturer Warranty 1 YearFinish Polishedearing Type Ball BearingFlange Bolt Hole qty 3Spline Quantity 30Bolt Circle Diameter 4.72 in. / 120 mmWheel Pilot Diameter 2.63 in. / 66.9 mmBrake Pilot Diameter 2.65 in. / 67.3 mmFlange Diameter 6.18 in. / 157 mmFlange Offset 1.65 in. / 42 mmHub Pilot Diameter 3.59 in. / 91.2 mmMaterial SteelFitment Direct replacementBearing Type Ball BearingItems Included 2 X wheel bearingUniversal Fitment NoVintage Car Part NoFlange Shape TriangularType Wheel Hub & Bearing AssemblyWheel Stud Quantity 5OE/OEM Part Number Wheel Hub AssemblyPerformance Part NoSuperseded Part Number 513288Anti-lock Braking System YesBolt Pattern 5 x 120 mmGeneration 3Knuckle Bolt Circle Diameter 4.17 in. / 106 mmKnuckle Bolt Hole Size M12x1.75Flange Bolts Included NoWheel Stud Size M14x1.5Wheel Studs Included YesBearing Generation G3
About Us:
We are committed to making the best auto-parts products and providing you with better services.
So if you have any quesiton or problem, please fell free to contact us about that.
Payment:
Paypal only.
Shipping:
2-8 working days in transit.
Product will be shipped within 2 business days after full payment is received and verified.
USPS, UPS, FedEx shipping will be provided.
Delivery time is about 2-8 business days to most of addresses.
Returns:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
30-day free return provided.
Contact Us:
Any quesiton or problem, do contact us please.
We are always online to answer.
Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.