When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Price: $40.41
Fitment:
For
Buick Century 1980-1989
Buick Skyhawk 1982-1986
Buick Skylark 1979-1998
Cadillac Cimarron 1982-1988
Chevrolet Beretta 1987-1996
Chevrolet Cavalier 1991-2004
Chevrolet Celebrity 1982-1989
Chevrolet Citation 1980-1986
Chevrolet Corsica 1987-1996
Chrysler Cirrus 1995-2000
Chrysler Laser 1984-1986
Chrysler LeBaron 1989-1995
Chrysler PT Cruiser 2001-2010
Chrysler Sebring 1995-2006
Dodge Aries 1986-1989
Dodge Caravan 1996-2000
Dodge Daytona 1985-1986
Dodge Dynasty 1988-1993
Dodge Neon 1995-2005
Dodge Spirit 1989-1995
Dodge Stratus 1995-2006
Oldsmobile Achieva 1992-1998
Oldsmobile Firenza 1982-1988
Oldsmobile Omega 1980-1984
Plymouth Acclaim 1989-1995
Plymouth Breeze 1996-2000
Plymouth Neon 1995-2000
Plymouth Sundance 1987-1994
Pontiac 6000 1982
Pontiac Fiero 1984-1985
Pontiac Grand Am 1985-1998
Pontiac Sunbird 1986-1994
Pontiac Sunfire 1995-2004
Pleasecheckcompatibilitynotes&descriptionforaccurateinformation.Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
TIPS:
1. Measure the fender gap and stock bolt length to choose suitable thickness. (For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)
2. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters,Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
Specifications:
Spacer Thickness: 1 inch or 25 mm
Vehicle bolt pattern: 5x100 mm
Wheelbolt pattern:5x100 mm
Thread Size:12x1.5
Bolt Shack Length: 35 mm
Torqued Down By Hand At: 70-80 FT/LBS
Hub Bore: 57.1 mm
Package including:
2x Wheel Spacers
(If there's a small tube of pink liquid in the package,it's thread locker.)
Installationtips:
1: Safely jack up the appropriate end of the vehicle and set if firmly on stands and remove the wheel nuts/bolts and wheels.
2: Remove the retaining washers and use a wire brush or abrasive pad to clean the flat surface to remove rust and corrosion. If the surface is not clean, it will vibrate.
3: Place a wheel spacer over the axle hub studs and make sure it sits firmly against the hub, then tighten the nuts in a crisscross pattern.
4: Place the wheel back onto the spacer and install the nuts in a crisscross pattern5: Lower the vehicle to the ground.
**After the tire is enlarged, to leave enough room for the front wheel steering.At the same time to strengthen the stability of the vehicle.During the installation process, it is necessary to observe that the gasket or flange can be completely fitted with the contact surface of the wheel hub and the wheel shaft, and try to make the added gasket or flange form a whole with the wheel hub and the wheel shaft. If you look directly above the car, the rims do not go beyond the top edge of the leaf, and it is best to achieve just flush.
Notes:
1. Professional installation is highly recommended.Due to the different display and different light, the picture may not reflect the actual color of the item.
2. All the items will be shipped to the buyer's address on the Paypal account, so please make sure that the address is correct.
3. Any damage during installation will not be refunded. Any modify action is excludes warranty.Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
4. If you have any questions, feel free to contact us, and we will reply you as soon as possible with the exception of weekends and holidays.
Item SpecificsManufacturer Part Number 11622219Brand APKVehicle Bolt Pattern 5x100mmManufacturer Warranty 1 YearHub Center Bore 57.1mmVintage Car Part NoInterchange Part Number 5x100 wheel spacers 1 inch thickOE/OEM Part Number Dodge Neon, Caravan, Aries; Pontiac Grand Am, Sunfire, SunbirdSuperseded Part Number Chevy Beretta, Cavalier, Chrysler LeBaron, PT Cruiser, SebringUniversal Fitment NoType Wheel SpacerColor SilverTorqued Down By Hand At 70-80 FT/LBSMaterial High Quality t6 6061 Billet AluminumPackage Gross Weight 5.05lbWheel Bolt Pattern 5x100mmNumber of Pieces 2Thread Pitch 12mm x 1.5 or 12x1.5 or M12x1.5Items Included 2 pcs wheel spacersHubcentirc YesBolt Shank Length 35mmThickness 1" or 25mmStud Grade 10.9Surface Finish CNC Machined Polished Aluminum FinishLug Patterns 5 Lugs
Payment
1. We accept PayPal only.
2. All major credit cards are accepted through secure payment processor PayPal.
3. Payment must be received within 7 business days of auction closing.
4. If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
5. NOTE: Import duties, taxes and chargers are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding buying.
- We ship to youreBay or Paypaladdress. Please make sure youreBay and Paypaladdress is correct before you pay.
- Items will be shippedwithin 1-3 businessday when we received payment.
- Delivery time depends on destination and other factors;
- International buyers please note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
b. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Any other item shipping damage or use problem, please contact us via eBay message in time, we will reply you within 1 working day.Contact Us
Our working time:
Beijing time:Monday to Saturday 8:00 am to 6:00
We do not work holidays in China
If you send email to us,In our working hours will be resumed within 48 hours.
If you we are not satisfied with the product or service,please contact me and don't give us negative or natural feedback,We must give you a satisfactory solution
Fitment:
For
Buick Century 1980-1989
Buick Skyhawk 1982-1986
Buick Skylark 1979-1998
Cadillac Cimarron 1982-1988
Chevrolet Beretta 1987-1996
Chevrolet Cavalier 1991-2004
Chevrolet Celebrity 1982-1989
Chevrolet Citation 1980-1986
Chevrolet Corsica 1987-1996
Chrysler Cirrus 1995-2000
Chrysler Laser 1984-1986
Chrysler LeBaron 1989-1995
Chrysler PT Cruiser 2001-2010
Chrysler Sebring 1995-2006
Dodge Aries 1986-1989
Dodge Caravan 1996-2000
Dodge Daytona 1985-1986
Dodge Dynasty 1988-1993
Dodge Neon 1995-2005
Dodge Spirit 1989-1995
Dodge Stratus 1995-2006
Oldsmobile Achieva 1992-1998
Oldsmobile Firenza 1982-1988
Oldsmobile Omega 1980-1984
Plymouth Acclaim 1989-1995
Plymouth Breeze 1996-2000
Plymouth Neon 1995-2000
Plymouth Sundance 1987-1994
Pontiac 6000 1982
Pontiac Fiero 1984-1985
Pontiac Grand Am 1985-1998
Pontiac Sunbird 1986-1994
Pontiac Sunfire 1995-2004
Pleasecheckcompatibilitynotes&descriptionforaccurateinformation.Check Your Vehicle Bolt Pattern/ PCD, Hub Bore Size, Thread Pitch, Vehicle fitment compatibility is only a guide.
TIPS:
1. Measure the fender gap and stock bolt length to choose suitable thickness. (For 1 inch or less or special adapters, if the stock studs are longer than the adapters, and the wheels do not have hollow spot in them, you may need to grind, or cut your existing lugs if you don't choose to purchase shorter studs.)
2. PLEASE CONFIRM what you actuall need, wheel spacers or wheel adapters,Wheel Adapters are used to change bolt patterns in order to properly fit wheels from one vehicle to the hub of a different vehicle.
Specifications:
Spacer Thickness: 1 inch or 25 mm
Vehicle bolt pattern: 5x100 mm
Wheelbolt pattern:5x100 mm
Thread Size:12x1.5
Bolt Shack Length: 35 mm
Torqued Down By Hand At: 70-80 FT/LBS
Hub Bore: 57.1 mm
Package including:
2x Wheel Spacers
(If there's a small tube of pink liquid in the package,it's thread locker.)
Installationtips:
1: Safely jack up the appropriate end of the vehicle and set if firmly on stands and remove the wheel nuts/bolts and wheels.
2: Remove the retaining washers and use a wire brush or abrasive pad to clean the flat surface to remove rust and corrosion. If the surface is not clean, it will vibrate.
3: Place a wheel spacer over the axle hub studs and make sure it sits firmly against the hub, then tighten the nuts in a crisscross pattern.
4: Place the wheel back onto the spacer and install the nuts in a crisscross pattern5: Lower the vehicle to the ground.
**After the tire is enlarged, to leave enough room for the front wheel steering.At the same time to strengthen the stability of the vehicle.During the installation process, it is necessary to observe that the gasket or flange can be completely fitted with the contact surface of the wheel hub and the wheel shaft, and try to make the added gasket or flange form a whole with the wheel hub and the wheel shaft. If you look directly above the car, the rims do not go beyond the top edge of the leaf, and it is best to achieve just flush.
Notes:
1. Professional installation is highly recommended.Due to the different display and different light, the picture may not reflect the actual color of the item.
2. All the items will be shipped to the buyer's address on the Paypal account, so please make sure that the address is correct.
3. Any damage during installation will not be refunded. Any modify action is excludes warranty.Returns are only accepted if unused and not installed.(ReturnsARE NOT ACCEPTED IF SPACERS-ADAPTERS HAVE BEEN INSTALLED TO YOUR VEHICLE)
4. If you have any questions, feel free to contact us, and we will reply you as soon as possible with the exception of weekends and holidays.
Item SpecificsManufacturer Part Number :11622219Brand :APKVehicle Bolt Pattern :5x100mmManufacturer Warranty :1 YearHub Center Bore :57.1mmVintage Car Part :NoInterchange Part Number :5x100 wheel spacers 1 inch thickOE/OEM Part Number :Dodge Neon, Caravan, Aries; Pontiac Grand Am, Sunfire, SunbirdSuperseded Part Number :Chevy Beretta, Cavalier, Chrysler LeBaron, PT Cruiser, SebringUniversal Fitment :NoType :Wheel SpacerColor :SilverTorqued Down By Hand At :70-80 FT/LBSMaterial :High Quality t6 6061 Billet AluminumPackage Gross Weight :5.05lbWheel Bolt Pattern :5x100mmNumber of Pieces :2Thread Pitch :12mm x 1.5 or 12x1.5 or M12x1.5Items Included :2 pcs wheel spacersHubcentirc :YesBolt Shank Length :35mmThickness :1" or 25mmStud Grade :10.9Surface Finish :CNC Machined Polished Aluminum FinishLug Patterns :5 LugsPaymentShippingReturnsContact Us
1. We accept PayPal only.
2. All major credit cards are accepted through secure payment processor PayPal.
3. Payment must be received within 7 business days of auction closing.
4. If you have bought multiple items from me, you can send me one payment for all the items instead of paying for them individually. When you click the Pay Now button, eBay will automatically determine if there are other items you have won or purchased from me and will combine them for your review.
5. NOTE: Import duties, taxes and chargers are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding buying.
- We ship to youreBay or Paypaladdress. Please make sure youreBay and Paypaladdress is correct before you pay.
- Items will be shippedwithin 1-3 businessday when we received payment.
- Delivery time depends on destination and other factors;
- International buyers please note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are buyer’s responsibility. We will try our best to reduce the risk of the custom duties.
b. Please check with your country's customs office to determine what these additional costs will be prior to buying.
Any other item shipping damage or use problem, please contact us via eBay message in time, we will reply you within 1 working day.
Our working time:
Beijing time:Monday to Saturday 8:00 am to 6:00
We do not work holidays in China
If you send email to us,In our working hours will be resumed within 48 hours.
If you we are not satisfied with the product or service,please contact me and don't give us negative or natural feedback,We must give you a satisfactory solution
All rights reserved.